Before installing NetVizura make sure to set the time on your server correctly. Time change after the installation will invalidate the license!

Before installing NetVizura you will have to install: Oracle Java 1.7, Tomcat 7 and PostgreSQL 9.3 or higher, in that order. The installation process has been tested on Ubuntu 14.

NetVizura Installation Steps

To install NetVizura follow these steps:

Step 1: sudo package installation: execute apt-get install sudo

Step 2: Oracle Java 1.7 package installation:

 

Default Java implementation is OpenJDK. You need to install Oracle Java package. Java packages should be installed before the Tomcat7 packages, if not Tomcat will use OpenJDK

  1. in file /etc/apt/sources.list, add the following lines:

    deb http://ppa.launchpad.net/webupd8team/java/ubuntu trusty main
    deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu trusty main
  2. execute command apt-get update

    1. ignore the error about "public key is not available"

If you receive something like:

W: GPG error: http://ppa.launchpad.net trusty InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY C2518248EEA14886
W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/trusty-security/main/source/Sources Hash Sum mismatch

W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/trusty-security/universe/source/Sources Hash Sum mismatch

W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/trusty-security/main/binary-amd64/Packages Hash Sum mismatch

W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/trusty-security/universe/binary-amd64/Packages Hash Sum mismatch

W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/trusty-security/main/binary-i386/Packages Hash Sum mismatch

W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/trusty-security/universe/binary-i386/Packages Hash Sum mismatch

E: Some index files failed to download. They have been ignored, or old ones used instead.

enter the following commands:

rm /var/lib/apt/lists/* -vf
apt-get update

     3. execute command apt-get install oracle-java7-installer and answer affirmatively to "Proceed without verification" and all other installation questions

     4. execute command ln -s /usr/lib/jvm/java-7-oracle /usr/lib/jvm/default-java to set Oracle's Java as a default Java on the system

      5. check if java is properly installed with command java -version

Step 3: Tomcat 7 package installation:

  1. execute command apt-get install tomcat7
  2. start Tomcat: service tomcat7 start
  3. verify that Tomcat is running properly with the command service tomcat7 status

Step 4: PostgreSQL package installation

  1. Create a file pgdg.list in /etc/apt/sources.list.d/ with some text editor: 

    nano /etc/apt/sources.list.d/pgdg.list and add the following line:

    deb http://apt.postgresql.org/pub/repos/apt/ trusty-pgdg main 

  2. execute command: wget --quiet -O - http://apt.postgresql.org/pub/repos/apt/ACCC4CF8.asc | sudo apt-key add -

  3. execute command apt-get update

  4. execute command apt-get install postgresql postgresql-client

  5. verify that PostgreSQL is running properly with the command service postgresql status


Step 5: NetVizura package installation
After this steps, install the NetVizura package downloaded from the website with the command: dpkg -i downloaded_file_name.deb

Step 6: Verify installation

Now you can go to NetVizura web interface http://serverip:8080/netvizura.

Default login credentials:

  • Username: admin
  • Password: admin01

For example, if your server IP is 1.1.1.1 then point your browser to http://1.1.1.1:8080/netvizura like in the screenshot below:

NetVizura - Login Page

Post Install Steps

Tomcat Memory Allocation 

After installation tweaking of configuration files is required in order to utilize the installed RAM to the fullest extent. The main consumers of RAM are operating system, PostgreSQL database and Tomcat. General rule for distributing memory is to split it in ratio 2:1 between PostgreSQL and Tomcat with 1 GB or more reserved for operating system. For instance:

Installed RAMPostgreSQLTomcatOS
4 GB2 GB1 GB1 GB
16 GB10 GB5 GB1 GB

During installation NetVizura automatically allocates memory for Tomcat process. The amount allocated to Tomcat process is calculated according to the formula:

(RAMtotal - 1GB) / 3 but no less than 1GB.

For instance:

Total RAMTomcat
3 GB1 GB
4 GB1 GB
16 GB5 GB

However, if you need to tweak Tomcat RAM allocation differently (the example for 2048MB):

  1. Edit file /etc/default/tomcat7
  2. Locate JAVA_OPTS environment variable that defines memory and uncomment it if it is 
commented. This line looks something like the following:
    JAVA_OPTS="${JAVA_OPTS} -Xmx1024m -Xms1024m +UseConcMarkSweepGC"
  3. Modify the -Xmx parameter to allocate additional memory to Tomcat. Additionally, set parameter -Xms to the same amount. This should look something like:
    JAVA_OPTS="-Djava.awt.headless=true -Xmx2048M -Xms2048M -XX:+UseConcMarkSweepGC"
  1. Save the file and restart Tomcat: service tomcat7 restart

Tweaking PostgreSQL

Tweaking PostgreSQL for best performance is a topic on which many books were written, but the following are some common sense suggestions. In general there are two groups of PostgreSQL tweaks that are helpful for NetVizura performance - "safe" and "unsafe" tweaks. "Safe" tweaks are those which can be applied in all cases. "Unsafe" tweaks trade reliability for performance. For the curious ones recommended reads (among countless others) are PostgreSQL Optimization GuidePostgreSQL Tuning Guide, this article and this book.

In order to apply following tweaks edit file /etc/postgresql/PG_VERSION_NUMBER/main/postgresql.conf. You will need to restart the PostgreSQL service after done editing with command: service postgresql restart. Almost all of the following parameters are commented with carron character (#). Although these tweaks are considered "safe" do take notice of the default values. Usually you can comment out the parameter that has been changed and PostgreSQL will revert to the default value. 

PostgreSQL "safe" tweaks

In the following example it is assumed that 4 GB of RAM is allocated for PostgreSQL.

parameterrecommended valuecomment
max_connections30NetVizura rarely uses more than 10 connections simultaneously, but it is good to have some reserve
shared_buffers1024MBthe recommended amount is RAM/4
effective_cache_size2048MB

the recommended amount is RAM/2, possibly even RAM * 3/4

chekpoint_segments32for write intensive apps (as NetVizura) it should be at least 16, with 32 as safe maximum
checkpoint_completion_target0.9 
default_statistics_target100 
work_mem8MB - 12MBThe formula used is max_connections*work_mem <= RAM/8, but using a bit more is still "safe"

PostgreSQL "unsafe" tweaks

These optimizations are considered "unsafe" since they could in very rare cases lead to data loss and/or corruption. If your VM is properly backed up we would consider the following optimizations safe. The following bring huge performance boosts to DB write process.
parameterrecommended valuecomment
maitenance_work_mem32MBspeeds up DB self clean process, not really important
wal_buffers16MB 
full_page_writesoff 
fsyncoffdon't wait for HDD to finish previous write operation. This brings the most benefit, but is considered potentially the most unsafe of all. If there is OS or HDD failure in exact instant when PSQL issues write command to HDD, that data will be lost and the DB itself could be corrupted. On the other hand, DB can issue several magnitude more write commands in the same time period and consider all these done, thus improving write performance immensely.
synchronous_commitoffsimilarly to "fsync" but less unsafe and with less benefit
checkpoint_segments64how much is cached in temp files before it is issued to proper DB files. Issuing big chunks of data for write rarely is usually better for performance than issuing small chunks often

On this page: