If you want to use a new customizable Dashboard Beta module, you need to enable it. However, the new Dashboard will show only data stored in Elasticsearch database. Meaning, Elasticsearch service should be enabled to start collecting data.
Elaticsearch service can be configured in > Settings > NetFlow Settings > Configuration and the following parameters are available:
If you are unable to change the service status (button is disabled), you should follow the link in the item description and install or enable Elasticsearch service on your server.
Once you change the Elasticsearch service status in Settings from Enabled to Disabled and vice versa, you will be automatically logged out from the application. After a new login, the new Dashboard will be visible if service status was set to Enabled or hidden if set to Disabled. |
Data will be deleted if any of these two conditions are satisfied. However, you cannot leave both configurations empty. One limitation for Elasticsearch database size is mandatory to be defined (value must be entered into the field Maximum database size (Elasticsearch) and/or Maximum database size in days (Elasticsearch)) |
For additional information about Elaticsearch installation, check detailed instructions in the point "Optional: Install Elasticsearch" included in every installation page. |
If your version of Netvizura was updated, installation steps for Elasticsearch service can be found on the link NetVizura Update, under the point "Optional: Install Elasticsearch". |