NetVizura charts are showing lower NetFlow traffic than expected. Here are several reasons why this might happen:
If you have a trial license, you should be aware that it has limitation, currently set to 500 flows/s. If your network device sends more than 500 flows/s, you will be able to see only 500 flows/s, while the rest will be dropped. You can check the number of received and dropped flows in the System Data (NFA). If you see dropped flows, send email to support@netvizura.com with the screenshot of the System tab, so that we can help further.
If you did not properly configure your network device, your NetFlow charts will not show correct data. The most common reason for this is if you did not enable NetFlow (Ingress) on all active interfaces (Ingress vs. Egress).
If you are using NetFlow flow sampling on your network device, your data shown in NetVizura charts will be lower. NetVizura has an option to multiply received data (Bytes, Packets, Flows) as much as needed to get a more realistic traffic in the charts (Sampling Settings).