April, 2024
NETFLOW ANALYZER
January, 2024
Data migration is only required if you are using previous versions of NetVizura (NetVizura 4.7.4 and older). Once you complete data migration, it is not possible to migrate data back to NetVizura 4.x version. IMPORTANT NOTE: If you have both NetFlow Analyzer and EventLog Analyzer modules, please contact support@netvizura.com before clearing data from PostgreSQL. |
GENERAL
August, 2023
GENERAL
February, 2023
GENERAL
April, 2021
December, 2020
IMPORTANT NOTE: Dear customers, Due to the improvements made on the sFlow traffic sampling, there is a possibility that your number of flows per second would increase. Should the described situation occur and you experience some licensing issues, please contact our Support team (support@netvizura.com). Sincerely yours, NetVizura team |
August, 2020
November, 2019
NETFLOW ANALYZER
April, 2019
March, 2019
August, 2018
Conversations are now showing the initiator/responder traffic
February, 2018
Report branding (custom logo, description and link) is provided
September, 2017
Grouping exporters by custom tag is now possible (e.g. core, edge, locations, data center, etc.), which enables separate monitoring and reporting
July, 2017
sFlow collection from various devices is now supported
February, 2017
Overview tab design is fine-tuned
January, 2017
Easy, fast and extremely useful new Overview added
Subnet sets are now moved to Traffic Pattern section (beside Subnets) for simpler navigation
Legal Agreements (EULA, MSA and FALA) updated/added and reorganized. Please review here.
November 16, 2016
November 3, 2016
NSEL data collection optimized and documentation added
Due to significant changes, ASA devices might show value increased/decreased compared to previous version. This is due to discovery of NSEL export method not specified in Cisco documentation
Selection of multiple objects in alarm conditions is introduced, currently only for volume and conversation alarm type
Fixed problem where charts were not displayed properly while selecting long time periods
End-user deduplication introduced
October 6, 2016
August 19, 2016
June 24, 2016
June 17, 2016
June 2, 2016
May 13, 2016
April 14, 2016
January 26, 2016
November 19, 2015