Click on the device name or IP address in the Exporter Table or type the device's IP address in the Exporter filter in the Syslog Table (text field under the Exporter column).
Type the IP addresses of the specific devices in the Exporter filter in the Syslog Table (text field under the Exporter column) separated by comma.
Click on the Total in the Exporter Table or clear the Exporter filter in the Syslog Table (text field under the Exporter column).
Click on the wanted severity level in the Severity Table to make it active (colored), click on the unwanted active severity levels to switch them off (they will turn gray); or, type the severity number in the Severity filter in the Syslog Table (text field under the Severity column). Multiple severity numbers must be separated by comma.
Clear the Severity filter in the Syslog Table (text field under the Severity column); or, click on the inactive severity levels (gray) in the Severity table to make them active.
Go to Settings > EventLog Settings > Configuration and under Service options set the Maximum Severity Level Shown parameter. For example, if the parameter is set to 3, shown severity levels will be 0, 1, 2, and 3.
Click on the Clear button above the Syslog chart.
Type the facility number or name in the Facility filter in the Syslog Table (text field under the Facility column).
Type the specific text in the Message filter in the Syslog Table (text field under the Messages column).
Go to Settings > EventLog Settings > Syslog Filters and make your filter. To learn more on making filters, go to chapter Error: Reference source not found Error: Reference source not found on page Error: Reference source not found.
Go to Settings > EventLog Settings > Configuration and set the Syslog socket port parameter.
Go to Settings > EventLog Settings > Configuration and set the database maintenance parameters. To learn more on database maintenance configuration, go to chapter Error: Reference source not found Error: Reference source not found, Error: Reference source not foundError: Reference source not foundError: Reference source not foundError: Reference source not found on page Error: Reference source not found.
Click on the Settings and Configuration icon (gear wheel, upper right corner of the screen) and choose About.