See logs for a specific device only
Click on the device name or IP address in the Exporter Table or type the device's IP address in the Exporter filter in the Syslog Table (text field under the Exporter column).
See logs for specific devices (more than one)
Type the IP addresses of the specific devices in the Exporter filter in the Syslog Table (text field under the Exporter column) separated by comma.
See logs for all exporters
Click on the Total in the Exporter Table or clear the Exporter filter in the Syslog Table (text field under the Exporter column).
See logs of specific severity level
Click on the wanted severity level in the Severity Table to make it active (colored), click on the unwanted active severity levels to switch them off (they will turn gray); or, type the severity number in the Severity filter in the Syslog Table (text field under the Severity column). Multiple severity numbers must be separated by comma.
See logs with all severity levels
Clear the Severity filter in the Syslog Table (text field under the Severity column); or, click on the inactive severity levels (gray) in the Severity table to make them active.
Set default severity levels shown
Go to 
> Settings > EventLog Settings > Configuration and under Service options set the Maximum Severity Level Shown parameter. For example, if the parameter is set to 3, shown severity levels will be 0, 1, 2, and 3.
Erase all filters quickly
Click on the Clear button above the Syslog chart.
See logs with specific facility
Type the facility number or name in the Facility filter in the Syslog Table (text field under the Facility column).
See logs that contain specific text in the message text body
Type the specific text in the Message filter in the Syslog Table (text field under the Messages column).
Filter out unwanted logs
Go to > Settings > EventLog Settings > Syslog filtering and make your filter. To learn more on making filters, go to chapter Error: Reference source not found Error: Reference source not found on page Error: Reference source not found.
Set the collection port for syslog messages
Go to > Settings > EventLog Settings > Configuration and under Service options set the Syslog socket port parameter.
Change database settings
Go to > Settings > EventLog Settings > Configuration and set the database maintenance.
See my license details
Click on the Settings and Configuration icon () and choose About.